SpectrumWiki

 
Unlicensed bands

Although these bands are allocated for ISM use, e.g. microwave ovens and industrial equipment, a major use has been unlicensed (Part 15) systems such as Wi-Fi, Bluetooth, and ZigBee. In the period 1995-2005, most of the cordless phones marketed in the US were in the 902-928 MHz band, but conflicts with the other uses and availability of DECT equipment has greatly decreased sales of 902-928 MHz cordless phones.

The rules for these bands sprung from FCC Docket 81-413 which sought to end an implicit prohibition of spread spectrum/CDMA technology that resulted from a focus on FDMA spectrum uses. This resulted in rules adopted in 1985 that allow unlicensed spread spectrum systems to use these bands for almost any possible application subject to a 1W power limit and a power spectral density limit. Initial applications, however, were limited to frequency hopping and "direct sequence" modulations, the latter being subject to ill-defined spreading and processing gain requirements.

An FCC rulemaking in 2002, in ET Docket No. 99-231, dropped the spreading and processing gain requirements, and permitted any digital modulation that meets the power and power spectral density limits. The immediate effect was to authorize Wi-Fi products under standard IEEE 802.11g. Subsequent Wi-Fi standards, including n and ac, were eligible for certification with no further rule changes.

Bluetooth is authorized under the original 1985 frequency hopping provisions.

The 2400 and 5800 MHz bands are used for Wi-Fi.

A good history is "The Innovation Journey of Wi-Fi: The Road To Global Success" by Wolter Lemstra, Vic Hayes, John Groenewegen; Cambridge University Press, 2010.